IndieSliderPro 36" Camera Support System

Built using industrial technology, the indiSLIDERpro has a weight load of over a TON! Yes, that's correct, unlike competitor's dual stainless steel rod system, the indiSLIDERpro will not bend or flex. This allows much higher weight loads, all the time gliding with ease.

The indiSLIDERpro is 36" long and includes adaptors so you can use any of our ball fluid head tripods. Attach to a tripod or place on apple boxes, the floor, even a table. The indiSLIDERpro will open up your film making to another dimension of shots!

Mounted on sticks or dolly with the moveable axis perpendicular to the lens, the indiSLIDERpro allows the operator to make quick lateral adjustments when shooting over-the-shoulder shots to maintain the relationship of the actors when one or the other shifts. The sliding mechanisms are four metal blocks that are screwed into by a baseplate, which a Manfrotto bowl receiver head will attach. In order to slide, the baseplate must be loosened to reduced friction on behalf of the blocks, or else it will be locked into position.

However, when the allen screws are loosened up to slide, the baseplate then has some 'give' to potentially wobble. This is the one issue that may make it difficult for some users. It is easier to get a smooth movement with lighter camera that is well balanced than a front-heavy rig with a lens-adapter. Another consideration with a heavier camera rig is the offset balance that will be experienced when the slider is on either extreme side. The best route is to use a sandbag on your tripod to both support the weight on one side while counter-balancing the other.

If you are shooting with two cameras next to each other on sticks the indiSLIDERpro is a great system to get the cameras as close as possible to the subject. The indiSLIDERpro is also useful for tabletop and flying a camera through tight spaces.

Open your mind to shots you didn't think possible for a rental fee you still won't think is possible.

Rental Includes:

• 36" indiSLIDERpro
• Bodgen Adaptor for any fluid head
• Case